Simulation Lab

Learn from a model. Run an experiment.

Explore 60 tools and 28 examples linked to published research, from robot learning and battery physics to markets, household saving, and public policy.

Browse toolsRun the CPU examplesRead the lab guideResearch routes for all 60 toolsCandidate reproduction results

Start with a published example

21 examples have recorded executions. Each comparison states the selected paper target, measured output, and remaining limits. Other routes point to inspected upstream instructions. Each guide explains its relationship to the paper.

Market microstructure

Original framework with upstream RMSC03 experiment

Upstream instructions checked; not run

Fisheries and policy

Published model; versioned source and experiment inspected

Upstream instructions checked; not run

Gazebo

Exact author paper artifact, explicitly labeled research artifact; paper links same repository.

Author code executed; see paper comparison

Bullet / PyBullet

Author repository explicitly identifies the two environments used in the paper and releases PPO checkpoints. Released checkpoint widths differ from TableII, so this is an adapted author-policy replay.

Executed adaptation

CARLA

Official CARLA team CoRL2017 experiment suite for CARLA 0.8.4. This is a later benchmark implementation, not automatically the exact original simulator revision.

Executed adaptation

FEniCSx / DOLFINx

Unmodified author model and adaptive estimator implementation; one named preprint figure result compared numerically using the same parameters.

Selected paper target compared; human review pending

DualSPHysics

Current author SPH validation case compared against the authors’ experimental fixture attributed to Koshizuka and Oka (1996). This executes the current case, not the original MPS algorithm or historical software-paper results.

Executed adaptation

Archived energy-system metric comparison and verified optimizer blocker

Exact deposited model/results and requested runtime source. Archived-data comparison completed. A separate unchanged original-scenario constructor was attempted for a GLPK adaptation, but resource allocation failed before any study optimization.

Archived outputs analysed; simulation not rerun

Unison: Table 2 and thread determinism

Original author-code reconstruction of Section 6.2, Table 2, with matched source, input data and settings. Thread-determinism checks have the narrower tested scope recorded separately.

Selected paper target compared; human review pending

SimGrid: Figure 13 endpoint workloads

Original reference-66 model and workload family. The introduction passage before Section 2 reconciles paper v3/v4 language with repository 3.10/3.36 pins. Makespan agreement is an author-benchmark consistency check, separate from historical hardware-performance reproduction.

Author code executed; see paper comparison

Find a tool

A growing inventory of solvers, modeling frameworks, and scene tools. Licenses below describe the source; runtime, data, and asset terms can differ.

Scenes and robotics

OpenUSD

Compose scenes and exchange time-sampled results; not a solver

TOST-1.0 (Apache-derived; modified trademarks)

Literature, examples, and requirements

Custom result attributes need an agreed schema; preserve native solver inputs.

See the construction route below for a candidate paper and its source assessment.

Paper-to-code construction: Orbit: A Unified Simulation Framework for Interactive Robot Learning Environments

Source checked 2026-11-15; repository available.

Scenes and robotics

Blender

Create and inspect geometry; render simulation outputs

GNU GPL; component notices apply

Literature, examples, and requirements

Scene authoring and rendering do not establish physical validity.

Literature: BlenderProc2: A Procedural Pipeline for Photorealistic Rendering; Kubric: A scalable dataset generator

Paper-to-code construction: Kubric: A scalable dataset generator

Source checked 2026-11-15; repository available.

Scenes and robotics

Isaac Sim

Robot dynamics; sensors; synthetic scenes

Apache-2.0 source; additional runtime and asset terms

Literature, examples, and requirements

Omniverse Kit and assets have separate NVIDIA terms; suitable NVIDIA GPU required for the documented workflow.

Literature: Orbit: A Unified Simulation Framework for Interactive Robot Learning Environments

Paper-to-code construction: Isaac Lab: A GPU-Accelerated Simulation Framework for Multi-Modal Robot Learning

Source checked 2026-11-15; repository available.

Scenes and robotics

Isaac Lab

Robot-learning environments and parallel training

BSD-3-Clause core; dependency terms apply

Literature, examples, and requirements

The walkthrough pins v2.2.0 with Isaac Sim 5.0.0; current main has changed. GPU runtime and assets have separate terms.

Literature: Orbit: A Unified Simulation Framework for Interactive Robot Learning Environments

Paper-to-code construction: Isaac Lab: A GPU-Accelerated Simulation Framework for Multi-Modal Robot Learning

Source checked 2026-11-15; repository available.

Scenes and robotics

Gazebo

Robot worlds; sensors; systems integration

Apache-2.0

Literature, examples, and requirements

Current Gazebo differs from the historical Gazebo in the 2004 paper; pin simulator and plugins together.

Literature: Design and use paradigms for gazebo, an open-source multi-robot simulator; GzDRL: Reproducible and Scalable Deep Reinforcement Learning with Gazebo

  • Gazebo — Author code executed; see paper comparison

Paper-to-code construction: GzDRL: Reproducible and Scalable Deep Reinforcement Learning with Gazebo

Source checked 2026-11-15; repository available.

Scenes and robotics

Webots

Robot simulation with ready-made worlds and controllers

Apache-2.0

Literature, examples, and requirements

Check the individual robot and scene asset licenses.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Deepbots: A Webots-Based Deep Reinforcement Learning Framework for Robotics

Source checked 2026-11-15; repository available.

Scenes and robotics

Bullet / PyBullet

Rigid-body dynamics; collision; Python robotics environments

Zlib core; separate bundled notices

Literature, examples, and requirements

Robot models and third-party examples carry separate terms.

Literature: Sim-to-Real: Learning Agile Locomotion For Quadruped Robots

Paper-to-code construction: Sim-to-Real: Learning Agile Locomotion For Quadruped Robots

Source checked 2026-11-15; repository available.

Scenes and robotics

Project Chrono

Multibody dynamics; contact; vehicle and granular systems

BSD-3-Clause

Literature, examples, and requirements

Choose modules and dependencies for the intended model; some workflows need substantial compute.

Literature: Chrono: An Open Source Multi-physics Dynamics Engine

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Chrono::Vehicle: template-based ground vehicle modelling and simulation

Source checked 2026-11-15; repository available.

Scenes and robotics

SOFA

Deformable-body and interactive multiphysics simulation

LGPL-2.1

Literature, examples, and requirements

Use for nonclinical computational studies here; plugin and material models need their own checks.

Literature: SOFA: A Multi-Model Framework for Interactive Physical Simulation

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Software toolkit for modeling, simulation, and control of soft robots

Source checked 2026-11-15; repository available.

Scenes and robotics

Drake

Robot dynamics; control; optimization and system analysis

BSD-3-Clause core; third-party notices

Literature, examples, and requirements

Some optional optimization backends are proprietary; use an open backend when required.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Swing up control of the Acrobot

Source checked 2026-11-15; repository available.

Engineering and multiphysics

OpenFOAM (Foundation)

Finite-volume CFD and related continuum solvers

GPL-3.0-or-later

Literature, examples, and requirements

Foundation and OpenCFD releases are different distributions; adapters must match the selected distribution.

Literature: A tensorial approach to computational continuum mechanics using object-oriented techniques; Proposal for Numerical Benchmarking of Fluid-Structure Interaction between an Elastic Object and Laminar Incompressible Flow

Paper-to-code construction: Proposal for Numerical Benchmarking of Fluid-Structure Interaction between an Elastic Object and Laminar Incompressible Flow

Source checked 2026-11-15; repository available.

Engineering and multiphysics

SU2

Aerodynamics; CFD; adjoint design optimization

LGPL-2.1

Literature, examples, and requirements

Mesh and boundary-condition checks are required before interpreting forces.

Literature: Stanford University Unstructured (SU2): An open-source integrated computational environment for multi-physics simulation and design

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Stanford University Unstructured (SU2): An open-source integrated computational environment for multi-physics simulation and design

Source checked 2026-11-15; repository available.

Engineering and multiphysics

preCICE

Couple separate solvers across meshes and time steps

LGPL-3.0

Literature, examples, and requirements

Coupling library; requires compatible native solvers and adapters.

Literature: preCICE v2: A sustainable and user-friendly coupling library; Proposal for Numerical Benchmarking of Fluid-Structure Interaction between an Elastic Object and Laminar Incompressible Flow

Paper-to-code construction: Proposal for Numerical Benchmarking of Fluid-Structure Interaction between an Elastic Object and Laminar Incompressible Flow

Source checked 2026-11-15; repository available.

Engineering and multiphysics

FEniCSx / DOLFINx

Finite-element PDE models in Python and C++

LGPL-3.0

Literature, examples, and requirements

Keep variational equations; boundary conditions; mesh and solver configuration.

Literature: Adaptive Finite Element Methods Based on Flux Equilibration Using FEniCSx

Paper-to-code construction: Adaptive Finite Element Methods Based on Flux Equilibration Using FEniCSx

Source checked 2026-11-15; repository available.

Engineering and multiphysics

deal.II

Finite-element framework with adaptive meshes

Apache-2.0 with LLVM exception OR LGPL-2.1-or-later

Literature, examples, and requirements

Tutorial examples can have their own notices; the FSI3 guide requires the nonlinear adapter solver.

Literature: Proposal for Numerical Benchmarking of Fluid-Structure Interaction between an Elastic Object and Laminar Incompressible Flow

Paper-to-code construction: Proposal for Numerical Benchmarking of Fluid-Structure Interaction between an Elastic Object and Laminar Incompressible Flow

Source checked 2026-11-15; repository available.

Engineering and multiphysics

MOOSE

Build coupled finite-element and finite-volume applications

LGPL-2.1

Literature, examples, and requirements

Framework and downstream applications can have different licenses and data requirements.

Literature: MOOSE: Enabling massively parallel multiphysics simulation

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: MOOSE: Enabling massively parallel multiphysics simulation

Source checked 2026-11-15; repository available.

Engineering and multiphysics

Elmer FEM

Structural; thermal; electromagnetic and fluid PDE models

GPL-2.0; some libraries LGPL

Literature, examples, and requirements

Inspect component notices and the selected solver manual.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Capabilities and performance of Elmer/Ice, a new-generation ice sheet model

Source checked 2026-11-15; repository available.

Engineering and multiphysics

CalculiX

Structural and thermal finite-element analysis

GPL-2.0

Literature, examples, and requirements

Keep native input decks and constitutive-model assumptions; pre/postprocessor is a separate component.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: preCICE v2: A sustainable and user-friendly coupling library

Source checked 2026-11-15; repository available.

Engineering and multiphysics

OpenModelica

Equation-based dynamic systems and Modelica models

AGPL-3.0 option; OSMC alternatives; separate runtime terms

Literature, examples, and requirements

Modelica libraries and FMUs have their own terms and dependencies.

Literature: The OpenModelica Integrated Environment for Modeling, Simulation, and Model-Based Development

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: OMG: A Scalable and Flexible Simulation and Testing Environment Toolbox for Intelligent Microgrid Control

Source checked 2026-11-15; repository available.

Engineering and multiphysics

PyBaMM

Electrochemical battery models and discharge protocols

BSD-3-Clause

Literature, examples, and requirements

CPU example included; parameter sets apply to particular cells and conditions.

Literature: Python Battery Mathematical Modelling (PyBaMM)

Paper-to-code construction: Python Battery Mathematical Modelling (PyBaMM)

Source checked 2026-11-15; repository available.

Engineering and multiphysics

openEMS

Electromagnetic fields with finite-difference time-domain methods

GPL-3.0

Literature, examples, and requirements

Requires geometry and a mesh; check excitation; absorbing boundaries and convergence.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: openEMS – a free and open source equivalent‐circuit (EC) FDTD simulation platform supporting cylindrical coordinates suitable for the analysis of traveling wave MRI applications

Source checked 2026-11-15; repository available.

Engineering and multiphysics

ngspice

Analog and mixed-signal circuit simulation

BSD-based; mixed component notices

Literature, examples, and requirements

Linked GitHub source is a mirror; upstream is SourceForge. Device models may have separate restrictions.

Literature: AutoCkt: Deep Reinforcement Learning of Analog Circuit Designs

Paper-to-code construction: AutoCkt: Deep Reinforcement Learning of Analog Circuit Designs

Source checked 2026-11-15; repository available.

Engineering and multiphysics

Cantera

Chemical kinetics; reacting flows and transport

BSD-3-Clause

Literature, examples, and requirements

Reaction-mechanism files and their validity ranges matter independently of software licensing.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Impact of non-ideal behavior on ignition delay and chemical kinetics in high-pressure shock tube reactors

Source checked 2026-11-15; repository available.

Engineering and multiphysics

LAMMPS

Particle and molecular dynamics across scales

GPL-2.0

Literature, examples, and requirements

Select potential files and units explicitly; accelerator packages are optional.

Literature: LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: LAMMPS - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales

Source checked 2026-11-15; repository available.

Engineering and multiphysics

DualSPHysics

Particle-based free-surface flow and fluid-body interaction

LGPL-2.1

Literature, examples, and requirements

CPU or CUDA builds; runtime depends strongly on particle count and duration. The case generator GenCase is a separately licensed binary-only helper; the example retrieves it and preserves its own terms.

Literature: DualSPHysics: Open-source parallel CFD solver based on Smoothed Particle Hydrodynamics (SPH)

Paper-to-code construction: DualSPHysics: Open-source parallel CFD solver based on Smoothed Particle Hydrodynamics (SPH)

Source checked 2026-11-15; repository available.

Finance

ABIDES

Agent-based limit-order-book market simulation

BSD-3-Clause

Literature, examples, and requirements

Original repository uses an old Python stack. The separate JPMorgan ABIDES-Gym repository is archived as checked 2026-11-15.

Literature: ABIDES Towards High-Fidelity Multi-Agent Market Simulation

Paper-to-code construction: ABIDES: Towards High-Fidelity Market Simulation for AI Research

Source checked 2026-11-15; repository available.

Finance

FinRL

Financial reinforcement-learning environments and backtests

MIT

Literature, examples, and requirements

Training and backtesting platform; historical data access and out-of-sample evaluation are separate tasks.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Deep reinforcement learning for automated stock trading: an ensemble strategy

Source checked 2026-11-15; repository available.

Finance

Open Source Risk Engine

Portfolio scenarios; exposure and risk calculations

BSD-3-Clause

Literature, examples, and requirements

QuantLib-based; use bundled example markets before connecting licensed market data.

Literature: Computing the impact of central clearing on systemic risk

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Computing the impact of central clearing on systemic risk

Source checked 2026-11-15; repository available.

Economics and policy

HARK / Econ-ARK

Heterogeneous-household choice and simulation

Apache-2.0

Literature, examples, and requirements

Current HARK example differs from the historical REMARK environment; see the authors' reproduction route.

Literature: Buffer-Stock Saving and the Life Cycle/Permanent Income Hypothesis

Paper-to-code construction: Buffer-Stock Saving and the Life Cycle/Permanent Income Hypothesis

Source checked 2026-11-15; repository available.

Economics and policy

QuantEcon.py

Markov chains; dynamic programming and economic computation

MIT

Literature, examples, and requirements

Supporting numerical library and lectures; choose and identify a specific economic model.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Uninsured Idiosyncratic Risk and Aggregate Saving

Source checked 2026-11-15; repository available.

Economics and policy

OG-Core

Overlapping-generations equilibrium and fiscal-policy models

CC0-1.0

Literature, examples, and requirements

CC0 dedication; country calibrations and tax functions are separate inputs.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Integrating Microsimulation Models of Tax Policy into a DGE Macroeconomic Model

Source checked 2026-11-15; repository available.

Economics and policy

Tax-Calculator

U.S. income and payroll-tax microsimulation

CC0-1.0

Literature, examples, and requirements

Use allowed public-use inputs; code access does not supply restricted tax records or establish current-law accuracy.

Literature: Integrating Microsimulation Models of Tax Policy into a DGE Macroeconomic Model

Paper-to-code construction: Integrating Microsimulation Models of Tax Policy into a DGE Macroeconomic Model

Source checked 2026-11-15; repository available.

Economics and policy

OpenFisca

Tax-benefit microsimulation from rules and household inputs

AGPL-3.0

Literature, examples, and requirements

Core engine; install the appropriate country package and pin the legislation period.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: How does targeted cash assistance affect incentives to work?

Source checked 2026-11-15; repository available.

Agents and operations

Agents.jl

Agent-based modeling in Julia

MIT

Literature, examples, and requirements

Julia environment; preserve agent activation and random-number settings.

Literature: Agents.jl: a performant and feature-full agent-based modeling software of minimal code complexity

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Agents.jl: a performant and feature-full agent-based modeling software of minimal code complexity

Source checked 2026-11-15; repository available.

Agents and operations

GAMA

Spatial agent-based models with geographic inputs

GPL-3.0

Literature, examples, and requirements

GIS inputs and scenario models have separate terms.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Participatory Modeling and Simulation with the GAMA Platform

Source checked 2026-11-15; repository available.

Agents and operations

Ciw

Queueing-network discrete-event simulation

MIT

Literature, examples, and requirements

CPU; arrival; service; blocking and queue disciplines must match the research model.

Literature: Ciw: An open-source discrete event simulation library; Improving the usability of open health service delivery simulation models using Python and web apps

Paper-to-code construction: Improving the usability of open health service delivery simulation models using Python and web apps

Source checked 2026-11-15; repository available.

Energy and infrastructure

PyPSA

Power flow; dispatch and energy-system optimization

MIT

Literature, examples, and requirements

Current core is MIT; historical releases used GPL. Use an open solver such as HiGHS when needed.

Literature: PyPSA: Python for Power System Analysis; PyPSA-Eur: An open optimisation model of the European transmission system

Paper-to-code construction: PyPSA-Eur: An Open Optimisation Model of the European Transmission System

Source checked 2026-11-15; repository available.

Energy and infrastructure

pandapower

Power flow; short circuits and network analysis

BSD-3-Clause

Literature, examples, and requirements

Some optional optimization engines have separate licenses; verify network input data.

Literature: Pandapower—An Open-Source Python Tool for Convenient Modeling, Analysis, and Optimization of Electric Power Systems

Paper-to-code construction: Pandapower—An Open-Source Python Tool for Convenient Modeling, Analysis, and Optimization of Electric Power Systems

Source checked 2026-11-15; repository available.

Energy and infrastructure

Calliope

Energy-system planning and optimization

Apache-2.0

Literature, examples, and requirements

Optimization model; open and commercial solver backends are distinct choices.

Literature: Calliope: a multi-scale energy systems modelling framework; Diversity of options to eliminate fossil fuels and reach carbon neutrality across the entire European energy system

Paper-to-code construction: Diversity of options to eliminate fossil fuels and reach carbon neutrality across the entire European energy system

Source checked 2026-11-15; repository available.

Energy and infrastructure

SUMO

Microscopic multimodal traffic simulation

EPL-2.0

Literature, examples, and requirements

LuST's published validation used SUMO 0.26; a modern port requires a new comparison.

Literature: Luxembourg SUMO Traffic (LuST) Scenario: Traffic Demand Evaluation

Paper-to-code construction: Luxembourg SUMO Traffic (LuST) Scenario: Traffic Demand Evaluation

Source checked 2026-11-15; repository available.

Energy and infrastructure

WNTR

Water-network hydraulics; failures and resilience

BSD-3-Clause

Literature, examples, and requirements

Depends on EPANET and other separately licensed components; network data may be sensitive.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: A software framework for assessing the resilience of drinking water systems to disasters with an example earthquake case study

Source checked 2026-11-15; repository available.

Energy and infrastructure

EnergyPlus

Building energy; HVAC and water-use simulation

BSD-style EnergyPlus license with naming clause

Literature, examples, and requirements

Weather files and building descriptions are separate inputs; check design-day and annual-run settings.

Literature: EnergyPlus: creating a new-generation building energy simulation program

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Analytical and comparative testing of EnergyPlus using IEA HVAC BESTEST E100–E200 test suite

Source checked 2026-11-15; repository available.

Environment and natural sciences

WRF

Numerical weather and atmospheric simulation

UCAR public-domain notice

Literature, examples, and requirements

HPC commonly needed; forcing data; preprocessing and parameterizations are separate dependencies.

See the construction route below for a candidate paper and its source assessment.

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: A Proposal for the Intercomparison of the Dynamical Cores of Atmospheric General Circulation Models

Source checked 2026-11-15; repository available.

Environment and natural sciences

OpenDrift

Lagrangian ocean; atmosphere and particle trajectories

GPL-2.0

Literature, examples, and requirements

Forecast/reanalysis forcing data can need accounts and can change independently of the code.

Literature: OpenDrift v1.0: a generic framework for trajectory modelling

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: OpenDrift v1.0: a generic framework for trajectory modelling

Source checked 2026-11-15; repository available.

Environment and natural sciences

COPASI

Biochemical reaction networks; deterministic and stochastic models

Artistic-2.0

Literature, examples, and requirements

Use published model files and kinetic parameters; no clinical inference from model execution.

Literature: COPASI—a COmplex PAthway SImulator

No OSRI walkthrough yet; start with the official documentation.

Paper-to-code construction: Chaos and birhythmicity in a model for circadian oscillations of the PER and TIM proteins in drosophila

Source checked 2026-11-15; repository available.

Environment and natural sciences

Tellurium

Reproducible systems-biology models and simulation experiments

Apache-2.0

Literature, examples, and requirements

SBML; SED-ML and COMBINE workflows; third-party solvers and model licenses remain separate.

Literature: Tellurium notebooks—An environment for reproducible dynamical modeling in systems biology

Paper-to-code construction: Tellurium notebooks—An environment for reproducible dynamical modeling in systems biology

Source checked 2026-11-15; repository available.

Environment and natural sciences

Brian 2

Spiking neural-network simulation

CeCILL-2.1

Literature, examples, and requirements

Equation-based models; compilation backend and units need explicit selection.

Literature: Brian 2, an intuitive and efficient neural simulator

Paper-to-code construction: Brian 2, an intuitive and efficient neural simulator

Source checked 2026-11-15; repository available.

Computing and networks

ns-3

Packet-level network simulation

GPL-2.0-only compatible codebase; component notices

Literature, examples, and requirements

GitHub is an upstream-maintained mirror; primary development is on GitLab.

Literature: Unison: A Parallel-Efficient and User-Transparent Network Simulation Kernel

Paper-to-code construction: Unison: A Parallel-Efficient and User-Transparent Network Simulation Kernel

Source checked 2026-11-15; repository available.

Computing and networks

SimGrid

Distributed-computing and scheduling simulation

LGPL-2.1 core; separate bundled notices

Literature, examples, and requirements

GitHub mirror; simulation platform files need calibration against the hardware being modeled.

Literature: Lowering entry barriers to developing custom simulators of distributed applications and platforms with SimGrid

Paper-to-code construction: Lowering entry barriers to developing custom simulators of distributed applications and platforms with SimGrid

Source checked 2026-11-15; repository available.

Agents and operations

SimPy

Process-based discrete-event simulation in Python

MIT

Literature, examples, and requirements

CPU; service-system models must preserve warm-up; replications and random streams.

Literature: Improving the usability of open health service delivery simulation models using Python and web apps

Paper-to-code construction: Improving the usability of open health service delivery simulation models using Python and web apps

Source checked 2026-11-15; official docs available.

Economics and policy

Dynare

Dynamic stochastic general equilibrium and related macroeconomic models

GPL-3.0-or-later for most source; component notices

Literature, examples, and requirements

Use GNU Octave for an open runtime; MATLAB is an optional proprietary alternative. Pin .mod file and calibration.

Literature: Shocks and Frictions in US Business Cycles: A Bayesian DSGE Approach

Paper-to-code construction: Shocks and Frictions in US Business Cycles: A Bayesian DSGE Approach

Source checked 2026-11-15; official docs available.

Download tools (CSV)Download examples (CSV)Add a tool or example